Volvo Truck MID 163 Fault Codes DTC

Service technicians have no problem recognising breakdowns and carrying out machine diagnostics, Volvo Truck MID 163 Fault Codes DTC, plus they are familiar with equipment from a variety of manufacturers.

Decryption of codes of malfunctions (DTC). Volvo, Renault, Mack Trucks – MID 163

Truck Error Code, Parameter, Description

Immobilizer Control Unit

MID 163 PID 224 FMI 2
Immobilizer Security Code.
Invalid response from engine control unit. The engine control unit and immobilizer unit are not compatible. In the immobilizer unit installed on the vehicle or in the engine control unit, the program does not correspond to the program for this chassis number.

MID 163 PID 224 FMI 12
Immobilizer Security Code.
There is no communication between the immobilizer unit and the engine control unit. Error in the data channel data SAE J1708 or a faulty engine control unit.

MID 163 SID 1 FMI 12
Immobilizer antenna (mounted on the ignition switch).
There is no signal from the antenna. The contacts in the connectors are damaged or oxidized, external signal distortion or the antenna is defective.

MID 163 SID 2 FMI 2
Defendant protection system (installed in the ignition key).
Incorrect response from the respondent. Incorrect or faulty transponder, several transponders are located next to the antenna, the transponder is not programmed in the key, or external signal distortion is present.

MID 163 SID 2 FMI 12
Defendant protection system (installed in the ignition key).
The immobilizer unit does not receive feedback from the defendant. Incorrect or faulty transponder. The antenna may be defective.

MID 163 SID 250 FMI 2
Data channel data SAE J1708.
Conflict of transmitted messages over the information data channel. several blocks simultaneously transmit messages.

MID 163 SID 250 FMI 12
Data channel data SAE J1708.
High traffic information channel. Damaged or oxidized contacts in the connectors, breakage or partial damage to the wires of the data channel. One of the control units may be defective.

MID 163 SID 253 FMI 2
Gauge memory, EEPROM.
The storage circuit in the immobilizer block is faulty or an error occurred while programming the data set.

MID 163 SID 253 FMI 13
Gauge memory, EEPROM.
Error in key data or faulty storage circuit in immobilizer unit.

The diagnosis tool Volvo Truck MID 163 Fault Codes DTC for trucks provides different possibilities such as information on the use and location of the connectors, detection and description of errors, activation of the fan, compression test and other components, system data information and more.