Service technicians have no problem recognising breakdowns and carrying out machine diagnostics, Volvo truck MID 136 Fault Codes DTC, plus they are familiar with equipment from a variety of manufacturers.
Decryption of codes of malfunctions (DTC). Volvo, Renault, Mack Trucks.
Volvo truck MID 136. Control unit for truck braking systems ABS, EBS
Error code, Parameter, Description
MID 136 SID 1 FMI 0
Wheel speed sensor, axis 1, left
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 1 FMI 1
Wheel speed sensor, axis 1, left
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 1 FMI 2
Wheel speed sensor, axis 1, left
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 1 FMI 3
Wheel speed sensor, axis 1, left
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 1 FMI 4
Wheel speed sensor, axis 1, left
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 1 FMI 5
Wheel speed sensor, axis 1, left
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 1 FMI 6
Wheel speed sensor, axis 1, left
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 1 FMI 7
Wheel speed sensor, axis 1, left
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor. To reset the code, restart No. 2.
MID 136 SID 1 FMI 8
Wheel speed sensor, axis 1, left
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 1 FMI 9
Wheel speed sensor, axis 1, left
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 1 FMI 10
Wheel speed sensor, axis 1, left
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 1 FMI 11
Wheel speed sensor, axis 1, left
Vibration when braking. Check brake gears
MID 136 SID 1 FMI 12
Wheel speed sensor, axis 1, left
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 1 FMI 13
Wheel speed sensor, axis 1, left
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 1 FMI 14
Wheel speed sensor, axis 1, left
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 2 FMI 0
Wheel speed sensor, axis 1, right
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 2 FMI 1
Wheel speed sensor, axis 1, right
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 2 FMI 2
Wheel speed sensor, axis 1, right
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 2 FMI 3
Wheel speed sensor, axis 1, right
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 2 FMI 4
Wheel speed sensor, axis 1, right
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 2 FMI 5
Wheel speed sensor, axis 1, right
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 2 FMI 6
Wheel speed sensor, axis 1, right
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 2 FMI 7
Wheel speed sensor, axis 1, right
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor. To reset the code, restart No. 2.
MID 136 SID 2 FMI 8
Wheel speed sensor, axis 1, right
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 2 FMI 9
Wheel speed sensor, axis 1, right
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 2 FMI 10
Wheel speed sensor, axis 1, right
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 2 FMI 11
Wheel speed sensor, axis 1, right
Vibration when braking. Check brake mechanisms.
MID 136 SID 2 FMI 12
Wheel speed sensor, axis 1, right
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 2 FMI 13
Wheel speed sensor, axis 1, right
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 2 FMI 14
Wheel speed sensor, axis 1, right
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 3 FMI 0
Wheel speed sensor, axle 2, left
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 3 FMI 1
Wheel speed sensor, axle 2, left
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 3 FMI 2
Wheel speed sensor, axle 2, left
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 3 FMI 3
Wheel speed sensor, axle 2, left
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 3 FMI 4
Wheel speed sensor, axle 2, left
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 3 FMI 5
Wheel speed sensor, axle 2, left
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm
MID 136 SID 3 FMI 6
Wheel speed sensor, axle 2, left
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 3 FMI 7
Wheel speed sensor, axle 2, left
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor. To reset the code, restart No. 2.
MID 136 SID 3 FMI 8
Wheel speed sensor, axle 2, left
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 3 FMI 9
Wheel speed sensor, axle 2, left
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 3 FMI 10
Wheel speed sensor, axle 2, left
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 3 FMI 11
Wheel speed sensor, axle 2, left
Vibration when braking. Check brake mechanisms.
MID 136 SID 3 FMI 12
Wheel speed sensor, axle 2, left
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 3 FMI 13
Wheel speed sensor, axle 2, left
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 3 FMI 14
Wheel speed sensor, axle 2, left
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 4 FMI 0
Wheel speed sensor, axle 2, right
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 4 FMI 1
Wheel speed sensor, axle 2, right
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 4 FMI 2
Wheel speed sensor, axle 2, right
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 4 FMI 3
Wheel speed sensor, axle 2, right
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 4 FMI 4
Wheel speed sensor, axle 2, right
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 4 FMI 5
Wheel speed sensor, axle 2, right
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 4 FMI 6
Wheel speed sensor, axle 2, right
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 4 FMI 7
Wheel speed sensor, axle 2, right
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor. To reset the code, restart No. 2.
MID 136 SID 4 FMI 8
Wheel speed sensor, axle 2, right
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 4 FMI 9
Wheel speed sensor, axle 2, right
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 4 FMI 10
Wheel speed sensor, axle 2, right
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 4 FMI 11
Wheel speed sensor, axle 2, right
Vibration when braking. Check brake mechanisms.
MID 136 SID 4 FMI 12
Wheel speed sensor, axle 2, right
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 4 FMI 13
Wheel speed sensor, axle 2, right
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 4 FMI 14
Wheel speed sensor, axle 2, right
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 5 FMI 0
Wheel speed sensor, axle 3, left
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 5 FMI 1
Wheel speed sensor, axle 3, left
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 5 FMI 2
Wheel speed sensor, axle 3, left
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 5 FMI 3
Wheel speed sensor, axle 3, left
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 5 FMI 4
Wheel speed sensor, axle 3, left
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 5 FMI 5
Wheel speed sensor, axle 3, left
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 5 FMI 6
Wheel speed sensor, axle 3, left
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 5 FMI 7
Wheel speed sensor, axle 3, left
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor. To reset the code, restart No. 2.
MID 136 SID 5 FMI 8
Wheel speed sensor, axle 3, left
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 5 FMI 9
Wheel speed sensor, axle 3, left
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 5 FMI 10
Wheel speed sensor, axle 3, left
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 5 FMI 11
Wheel speed sensor, axle 3, left
Vibration when braking. Check brake mechanisms.
MID 136 SID 5 FMI 12
Wheel speed sensor, axle 3, left
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 5 FMI 13
Wheel speed sensor, axle 3, left
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 5 FMI 14
Wheel speed sensor, axle 3, left
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 6 FMI 0
Wheel speed sensor, axle 3, right
Incorrect sensor connection. Check wiring and sensor connector.
MID 136 SID 6 FMI 1
Wheel speed sensor, axle 3, right
The gap between the sensor and the gear is incorrect. Check clearance (not more than 0.7 mm.)
MID 136 SID 6 FMI 2
Wheel speed sensor, axle 3, right
Large clearance between the sensor and the gear; the gear is crooked or dirty. Check the gear, the clearance of the sensor (not more than 0.7 mm.), The play of the wheel bearing.
MID 136 SID 6 FMI 3
Wheel speed sensor, axle 3, right
Shorting one of the wires to plus. Check wiring and sensor connector.
MID 136 SID 6 FMI 4
Wheel speed sensor, axle 3, right
Shorting one of the wires to minus. Check wiring and sensor connector.
MID 136 SID 6 FMI 5
Wheel speed sensor, axle 3, right
Open circuit, short to positive or negative, defective sensor, defective modulator. Check wiring, check sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 6 FMI 6
Wheel speed sensor, axle 3, right
Short circuit between wires. Check wiring and sensor resistance.
MID 136 SID 6 FMI 7
Wheel speed sensor, axle 3, right
Large gap between the sensor and the gear, the sensor is faulty. Check sensor wires, clearance (not more than 0.7 mm.), Gear integrity. If the wires and gear are intact, replace the sensor.
MID 136 SID 6 FMI 8
Wheel speed sensor, axle 3, right
Shorting the sensor signal to another signal. Check the wires
sensor resistance. If the wires and sensor are normal, replace the modulator. Note: Sensor resistance for ABS 1150 + 100 / -50 ohm, for EBS 1600 + 100 / -100 ohm.
MID 136 SID 6 FMI 9
Wheel speed sensor, axle 3, right
Incorrect setting of the wheel circumference, a large gap between the sensor and the gear wheel, the wheel brakes without pressing the brake pedal, the wheel is lowered or punctured, different wheel circumferences on the right and left sides. Check brake mechanisms, gears, difference in wheel circumference. To reset the code, restart No. 2.
MID 136 SID 6 FMI 10
Wheel speed sensor, axle 3, right
A large gap between the sensor and the gear wheel, the contacts and wires are damaged, the gear wheel is damaged, the sensor is faulty, the modulator is faulty. Check wheel bearing play, sensor wiring, clearance (not more than 0.7 mm.), Gear. If everything is normal, replace the modulator. To reset the code, restart No. 2.
MID 136 SID 6 FMI 11
Wheel speed sensor, axle 3, right
Vibration when braking. Check brake mechanisms.
MID 136 SID 6 FMI 12
Wheel speed sensor, axle 3, right
Control unit malfunction or electromagnetic interference. Contact the service station.
MID 136 SID 6 FMI 13
Wheel speed sensor, axle 3, right
Incorrect data set in the control unit, incorrect wheel circumference. To reset the code, restart No. 2.
MID 136 SID 6 FMI 14
Wheel speed sensor, axle 3, right
Electronic components in the modulator are not working. Replace the modulator.
MID 136 SID 7 FMI 1
ABS valve, axis 1, left
Open two control wires, open negative cable. Check the wires between the ABS unit and the valve.
MID 136 SID 7 FMI 3
ABS valve, axis 1, left
Shorting the control wires to plus, shorting to the wire of another valve. Check wiring of all ABS valves.
MID 136 SID 7 FMI 5
ABS valve, axis 1, left
Open of one of the control wires. Check control wires.
MID 136 SID 7 FMI 6
ABS valve, axis 1, left
Shorting the control wires to minus. Check control wires.
MID 136 SID 8 FMI 1
ABS valve, axis 1, right
Open two control wires, open negative cable. Check the wires between the ABS unit and the valve.
MID 136 SID 8 FMI 3
ABS valve, axis 1, right
Shorting the control wires to plus, shorting to the wire of another valve. Check wiring of all ABS valves.
MID 136 SID 8 FMI 5
ABS valve, axis 1, right
Open of one of the control wires. Check control wires.
MID 136 SID 8 FMI 6
ABS valve, axis 1, right
Shorting the control wires to minus. Check control wires.
MID 136 SID 9 FMI 1
ABS valve, axle 2, left
Open two control wires, open negative cable. Check the wires between the ABS unit and the valve.
MID 136 SID 9 FMI 3
ABS valve, axle 2, left
Shorting the control wires to plus, shorting to the wire of another valve. Check wiring of all ABS valves.
MID 136 SID 9 FMI 5
ABS valve, axle 2, left
Open of one of the control wires. Check control wires.
MID 136 SID 9 FMI 6
ABS valve, axle 2, left
Shorting the control wires to minus. Check control wires.
MID 136 SID 10 FMI 1
ABS valve, axle 2, right
Open two control wires, open negative cable. Check the wires between the ABS unit and the valve.
MID 136 SID 10 FMI 3
ABS valve, axle 2, right
Shorting the control wires to plus, shorting to the wire of another valve. Check wiring of all ABS valves.
MID 136 SID 10 FMI 5
ABS valve, axle 2, right
Open of one of the control wires. Check control wires.
MID 136 SID 10 FMI 6
ABS valve, axle 2, right
Shorting the control wires to minus. Check control wires.
MID 136 SID 7 FMI 0
Modulator, axis 1, left
The modulator silencer is clogged, the modulator internal malfunction, leak through the foot brake valve, air leak in the brake cylinder. Check the modulator muffler, pressure on the modulator without depressing the brake pedal. To reset the code, restart No. 1.
MID 136 SID 7 FMI 1
Modulator, axis 1, left
The modulator silencer is clogged, air lines are clogged or damaged, mechanical malfunction in the modulator or in the foot brake valve. Check modulator silencer, check air lines. To reset the code, restart No. 1.
MID 136 SID 7 FMI 2
Modulator, axis 1, left
Electromagnetic interference, internal malfunction in the modulator, defective EBS control unit. Check wires, contacts, connectors.
MID 136 SID 7 FMI 3
Modulator, axis 1, left
Short circuit of the modulator power wire to a constant plus from the battery, internal malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 7 FMI 4
Modulator, axis 1, left
Short circuit of the power wire to minus, internal malfunction in the modulator, malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 7 FMI 5
Modulator, axis 1, left
The voltage on the modulator is absent or too low. Check the power of the modulator, the absence of a short in the supply wire to minus.
MID 136 SID 7 FMI 6
Modulator, axis 1, left
High voltage on the modulator, damaged wires,
defective EBS unit. Check the modulator wiring for a short. If the wires are normal, replace the EBS unit.
MID 136 SID 7 FMI 7
Modulator, axis 1, left
The modulator muffler is clogged, the modulator is defective. Check and clean the modulator muffler; if the muffler is normal, replace the modulator.
MID 136 SID 7 FMI 8
Modulator, axis 1, left
Air tubes clogged or damaged, modulator or ABS valve defective. Check the tubes from the modulator to the ABS valve, check the air pressure on the modulator. If all of the above is normal, replace the modulator. Try restarting # 1.
MID 136 SID 7 FMI 9
Modulator, axis 1, left
Short circuit, wire break, software failure, modulator faulty, EBS block faulty. Check the wiring between the modulator and the EBS unit, reprogram the EBS unit, replace the modulator, replace the EBS unit.
MID 136 SID 7 FMI 10
Modulator, axis 1, left
The modulator is faulty, the power of the modulator is turned off until the completion of internal operations (for example, turning off the batteries with the ignition on). Delete error codes, if the fault reappears, replace the modulator.
MID 136 SID 7 FMI 11
Modulator, axis 1, left
Faulty modulator, faulty EBS unit. If one modulator fails, replace the modulator. If several modulators fail, replace the EBS block.
MID 136 SID 7 FMI 12
Modulator, axis 1, left
Defective modulator, modulator wiring, EBS unit. Delete error codes, check the modulator wiring, replace the modulator if the fault reappears.
MID 136 SID 7 FMI 13
Modulator, axis 1, left
The modulator is replaced by a modulator with a different catalog number. Check the correspondence of the modulator number, reprogram the EBS block.
MID 136 SID 7 FMI 14
Modulator, axis 1, left
Damaged, leaking or clogged modulator tubes or brake cylinder tubes, insufficient air on the modulator, defective modulator, clogged muffler. Check air pipelines, modulator muffler, air pressure at the inlet to the modulator. Try restarting # 1.
MID 136 SID 8 FMI 0
Modulator, axis 1, right
The modulator silencer is clogged, the modulator internal malfunction, leak through the foot brake valve, air leak in the brake cylinder. Check the modulator muffler, pressure on the modulator without depressing the brake pedal. To reset the code, restart No. 1.
MID 136 SID 8 FMI 1
Modulator, axis 1, right
The modulator silencer is clogged, air lines are clogged or damaged, mechanical malfunction in the modulator or in the foot brake valve. Check modulator silencer, check air lines. To reset the code, restart No. 1.
MID 136 SID 8 FMI 2
Modulator, axis 1, right
Electromagnetic interference, internal malfunction in the modulator, defective EBS control unit. Check wires, contacts, connectors.
MID 136 SID 8 FMI 3
Modulator, axis 1, right
Short circuit of the modulator power wire to a constant plus from the battery, internal malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 8 FMI 4
Modulator, axis 1, right
Short circuit of the power wire to minus, internal malfunction in the modulator, malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 8 FMI 5
Modulator, axis 1, right
The voltage on the modulator is absent or too low. Check the power of the modulator, the absence of a short in the supply wire to minus.
MID 136 SID 8 FMI 6
Modulator, axis 1, right
High voltage on the modulator, damaged wires,
defective EBS unit. Check the modulator wiring for a short. If the wires are normal, replace the EBS unit.
MID 136 SID 8 FMI 7
Modulator, axis 1, right
The modulator muffler is clogged, the modulator is defective. Check and clean the modulator muffler; if the muffler is normal, replace the modulator.
MID 136 SID 8 FMI 8
Modulator, axis 1, right
Air tubes clogged or damaged, modulator or ABS valve defective. Check the tubes from the modulator to the ABS valve, check the air pressure on the modulator. If all of the above is normal, replace the modulator. Try restarting # 1.
MID 136 SID 8 FMI 9
Modulator, axis 1, right
Short circuit, wire break, software failure, modulator faulty, EBS block faulty. Check the wiring between the modulator and the EBS unit, reprogram the EBS unit, replace the modulator, replace the EBS unit.
MID 136 SID 8 FMI 10
Modulator, axis 1, right
The modulator is faulty, the power of the modulator is turned off until the completion of internal operations (for example, turning off the batteries with the ignition on). Delete error codes, if the fault reappears, replace the modulator.
MID 136 SID 8 FMI 11
Modulator, axis 1, right
Faulty modulator, faulty EBS unit. If one modulator fails, replace the modulator. If several modulators fail, replace the EBS block.
MID 136 SID 8 FMI 12
Modulator, axis 1, right
Defective modulator, modulator wiring, EBS unit. Delete error codes, check the modulator wiring, replace the modulator if the fault reappears.
MID 136 SID 8 FMI 13
Modulator, axis 1, right
The modulator is replaced by a modulator with a different catalog number. Check the correspondence of the modulator number, reprogram the EBS block.
MID 136 SID 8 FMI 14
Modulator, axis 1, right
Damaged, leaking or clogged modulator tubes or brake cylinder tubes, insufficient air on the modulator, defective modulator, clogged muffler. Check air pipelines, modulator muffler, air pressure at the inlet to the modulator. Try restarting # 1.
MID 136 SID 9 FMI 0
Modulator, axis 2, left
The modulator silencer is clogged, the modulator internal malfunction, leak through the foot brake valve, air leak in the brake cylinder. Check the modulator muffler, pressure on the modulator without depressing the brake pedal. To reset the code, restart No. 1.
MID 136 SID 9 FMI 1
Modulator, axis 2, left
The modulator silencer is clogged, air lines are clogged or damaged, mechanical malfunction in the modulator or in the foot brake valve. Check modulator silencer, check air lines. To reset the code, restart No. 1.
MID 136 SID 9 FMI 2
Modulator, axis 2, left
Electromagnetic interference, internal malfunction in the modulator, defective EBS control unit. Check wires, contacts, connectors.
MID 136 SID 9 FMI 3
Modulator, axis 2, left
Short circuit of the modulator power wire to a constant plus from the battery, internal malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 9 FMI 4
Modulator, axis 2, left
Short circuit of the power wire to minus, internal malfunction in the modulator, malfunction in the EBS unit. Check for short circuits in the modulator circuit.
MID 136 SID 9 FMI 5
Modulator, axis 2, left
The voltage on the modulator is absent or too low. Check the power of the modulator, the absence of a short in the supply wire to minus.
JCB Fault Codes List
MAN TGA Fault codes list
Fault Codes and diagnostic code Information for Caterpillar Control